Metal Roofing Blackburn — Colorbond & Re-Sheeting Specialists
Rusted tin off, premium BlueScope Colorbond on. Blackburn’s dedicated metal re-roof crew — every profile, every colour, structural warranty in writing.
Metal Roof Replacement in Blackburn 3130
Most Blackburn homes built between the 1920s and the 1980s wear the same roofing material: old-school galvanised corrugated iron. After 40 to 60 years of Melbourne weather, those sheets rust through at the laps, lift in the wind, and drip water into ceiling cavities during every decent storm. Melbourne Made Roofing is the metal re-roof specialist that strips those tired roofs and replaces them with premium BlueScope Colorbond — the modern, longer-lasting, better-looking successor built right here in Australia.
There’s more to metal roofing than picking a colour. Five profiles, sixteen colours, concealed or exposed fixings, different rib depths, and wildly different pitches each call for different approaches. Whether you’re dealing with a heritage Blackburn weatherboard, a tired 60s brick veneer, or a modern architectural build, our in-house metal crew installs Colorbond and nothing else — we don’t do tile, we don’t do slate, we specialise.
Real Metal Roof Replacements. Real Blackburn Results.
Every photo below is an actual Melbourne Made Roofing job — tin or tile stripped, premium BlueScope Colorbond installed. Hit the button below any one to book your Blackburn metal re-roof assessment.
Full tear-off of rust-weakened corrugated iron. Battens inspected and replaced where rotten, new sarking laid, premium BlueScope Custom Orb installed in Monument. Classic Melbourne profile, backed by a 36-year material warranty.
Heavy cement tiles removed to lighten structural load, timber trusses inspected for sag and straightened, new insulation installed, and Trimdek Colorbond in Basalt laid down the run. Owner saved significant weight on the frame and gained a modern weatherproof envelope.
Architectural Kliplok concealed-fix profile for a near-flat pitch on a recent Blackburn extension. Clean lines, no exposed screws, zero leak points at fasteners. New valley flashings, apron flashings and ridge caps all installed to factory spec.
Ageing ribbed metal roof stripped, replaced with new Trimdek Colorbond in Woodland Grey, paired with matching new gutters, fascia and downpipes. Integrated finish that looks intentional from the street.
Period cottage re-roof — original rusted iron off, fresh Colorbond Custom Orb in Surfmist down. Matched the house’s heritage corrugated profile while adding a 36-year warranty and modern thermal performance.
Metal Is the Right Roof for Blackburn Homes
Blackburn’s housing stock — Victorian cottages, post-war weatherboards, 60s brick veneer and modern infill — all benefit from modern metal. Here’s why most Blackburn re-roofs we quote end up as Colorbond.
Older Blackburn roofs are lighter-framed than tile-loaded homes. Many post-war Blackburn weatherboards were never designed for the weight of concrete tiles, even though some were retro-fitted with tiles decades ago. A metal re-roof — or a tile-to-metal conversion — drops roof weight dramatically, eases structural stress on ageing timber trusses, and buys the frame another generation of life.
Blackburn’s inner-north weather is hard on roofs. The hot north-westerlies in summer and driving southerly rain in winter find every lap, fastener and flashing. Modern Colorbond sheets have longer runs with fewer joins, concealed fixings on Kliplok and interlocking ribs on Trimdek — all of which dramatically reduce the number of potential leak points versus the 40-year-old iron that came off.
Tradies in this neighbourhood matter. We’ve been re-roofing in Blackburn, Thornbury, Reservoir and Northcote for years. We know which streets need a boom lift versus a standard scaffold, where the laneway access gets tight, and how steep the pitches run on the older Edwardian and Victorian homes. We don’t send a sales rep who’s never held a snip in his life — the person quoting your Blackburn metal re-roof is the one running the crew on the day.
Every Metal Re-Roof Option for Blackburn
Tin to Colorbond Re-Sheeting
Classic Blackburn scenario — old galvanised iron stripped back to the battens and fresh BlueScope Colorbond laid down. Every sheet, flashing and valley replaced.
Tile to Metal Conversion
Heavy cement or terracotta tiles removed, frame straightened and reinforced if required, sarking upgraded, Colorbond laid to suit your pitch.
Kliplok Standing Seam
Concealed-fix architectural profile for low-pitch modern builds and extensions. No exposed screws, no leak points at fasteners.
Custom Orb Corrugated
The classic Australian corrugated profile — perfect for heritage Blackburn cottages and Edwardians where the original ribbed look is part of the home’s character.
Trimdek Ribbed
Cleaner, flatter ribs than Custom Orb. Our most-requested profile in Blackburn for post-war homes and modern architectural builds.
Flashings, Valleys & Ridge Caps
No metal re-roof is complete without matched Colorbond flashings to every wall, valley, ridge and penetration. We replace every piece.
Pick the Profile, We Handle the Rest
Colorbond Profiles We Install in Blackburn
BlueScope Colorbond is Australian-made steel with a baked-on paint and corrosion-resistant coating. We install the full range — each profile suits a different style of Blackburn home. We’ll walk you through it on the day of the assessment.
- Custom Orb — classic corrugated, heritage-friendly
- Trimdek — flatter ribs, modern look, most popular
- Kliplok — standing seam, concealed fixings, low-pitch
- Spandek — trapezoidal for architectural builds
- Longline — widely-spaced ribs, low-waste on long runs
What’s Included in Your Blackburn Metal Re-Roof
Every Blackburn metal re-roof we quote includes everything needed to turn the job key-in-the-door. No “from” pricing, no mid-job variations.
- Full strip of the existing metal or tile roof
- Timber batten and rafter inspection and remedial work
- New anticon blanket / sarking layer
- Premium BlueScope Colorbond sheets in your chosen profile and colour
- All new ridge caps, valleys, apron flashings and barge flashings
- Matching Colorbond gutters and fascia (optional package)
- Full site clean-up and off-site metal waste disposal
- Written 10-year workmanship warranty on handover
Our Blackburn Metal Re-Roof Process
Transparent from day one. You’ll know exactly what’s happening on your roof and when.
Free Site Assessment
On-site inspection of your Blackburn roof with photos, measurements and profile recommendations.
Written Scope
Full line-itemised written quote — profile, colour, flashings, warranty. Nothing hidden.
Schedule & Prep
Dates that suit you, full site safety prep, scaffold set-up, neighbour notifications.
Strip & Sheet
Old roof off in one day where possible, timber checked, Colorbond sheeted, flashings sealed.
Warranty Handover
Final walkthrough, BlueScope material docs and our 10-year workmanship warranty handed over.
Blackburn Metal Re-Roofing Questions
Can you replace old tin and iron roofs in Blackburn?
Can I convert my tile roof to metal in Blackburn?
What’s the difference between Custom Orb, Trimdek and Kliplok?
How long does a Blackburn metal re-roof take?
What warranty comes with a Colorbond metal roof?
Do you install new gutters and fascia during a metal re-roof?
Which Colorbond colours are best for Blackburn homes?
Is Colorbond quieter than old corrugated iron?
Do you handle insurance-claim metal re-roofs in Blackburn?
We Also Do Metal Re-Roofs Near Blackburn
Free Blackburn Metal Re-Roof Quote
Fill in the form and we’ll be in touch within 24 hours to book your free on-site Blackburn metal roof assessment. No pressure, no obligation, no hidden extras.
- Free on-site inspection anywhere in Blackburn 3130
- Full written scope — profile, colour, flashings, warranty
- 15+ years experience across Melbourne
- BlueScope-only Colorbond, 36-year material warranty
- Licensed, insured and WorkSafe compliant
Prefer to call? 0480 723 069